Commissioning Guide
Warning!
These instructions are incomplete at this point! Anyone braving ahead before instructions are written, you're doing it at your own risk. If you're unsure about something, please ask questions! You can reach us at hello@tinwhiskers.io
Recommended Build Order
- Assembling the Frame
- Assembling the Delta pulley and arms
- Assembling the Delta carbon rods
- Assembling the Down-Looking Camera Module
- Assembling the End Effector Fan
- Assembling the End Effector
- Assembling the EMC02 Motion Controller Board
- Assembling the Delta Mechanism
- Assembling the Heated bed
- Assembling the ATX power supply module
- Assembling the Up-looking camera
- Assembling the SMT modular tool
- Assembling the Vacuum Pump Mount
- Final Wiring of the SMT modular tool
- How to assemble the AT0004 - Modular Tool - J-Head hotend
- How to assemble the AT0002 - Wade extruder
- Final Wiring of the 3D Printing Modular Tool
- Programming FireStep into the Arduino Mega 2560
- Commissioning
- Eclipse / OpenPnP Setup
- OpenPnp: Configuring machine.xml
- OpenPnP: Configuring log4j.properties
- OpenPnP: Set up a Tape Strip or Tray Feeder
