-
-
Windows and Mac binaries available at: http://koti.kapsi.fi/~kliment/printrun/
-
Linux: sudo apt-get install python-serial python-wxgtk2.8 python-pyglet python-numpy cython python-libxml2 python-gobject python-dbus python-psutil git Clone the repository. ''git clone https://github.com/kliment/Printrun.git'...
-
Note that the individual steps may vary slightly between OS versions, but the installation is very easy and common-sense.
-
-
-
Read the markdown page on the github repo: https://github.com/kliment/Printrun/blob...
-
-
-
If you're new to printrun, you might find this video helpful:
-
-
Cancel: I did not complete this guide.
3 other people completed this guide.