Skip to main content
/

Site Navigation

Your Account

Choose Language

Help

Step Type:

Drag to rearrange

Install the 3DAT0011a ATC hub diffuser, over the LED ring light. Use three M3 x 20mm pan-head screws, and three M3 nuts to hold the diffuser to the assembly.

Note that it's not 100% necessary at this point to have the ring light board built and installed. The down-looking LED ring light board was provided in kit form to be used as a PnP SMT practice kit. Therefore, it's OK if you don't have it installed at this point,

Your contributions are licensed under the open source Creative Commons license.