Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #10

Edit by Neil Jansen

Edit approved by Neil Jansen

Before
After
Unchanged

Step Lines

+[title] Attach Fan Module
+[* black] Attach the fan module to the end effector.
+[* black] Insert 4x M3 nuts on one of the three sides of the end effector. Two will go in the diffuser, and two into the black 3D printed housing.
+[* black] Use 4x M3 x 12mm pan-head machine screws to attach the fan to the end effector.
+[* icon_note] Orient the fan so that the wires exit the fan on the bottom part of the end effector.