Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #9

Edit by Neil Jansen

Edit approved by Neil Jansen


Step Lines

+[title] Attach Camera Module
+[* black] Attach the camera module to the end effector.
+[* red] Insert 4x M3 nuts on one of the three sides of the end effector. Two will go in the diffuser, and two into the black 3D printed housing.
+[* orange] Use 4x M3 x 8mm pan-head machine screws to attach the camera module to the side of the end effector.
+[* icon_reminder] Note that the camera will be oriented to the FRONT of the machine.