Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #9

Edit by Neil Jansen

Edit approved by Neil Jansen

Before
After
Unchanged

Step Lines

[title] Attach Camera Module
[* black] Attach the camera module to the end effector.
+[* icon_caution] NOTE: The camera module isn't shown in the picture, but it should be complete per the [guide|20|Camera Module Assembly Guide], before attaching it in this step. We'll get a better picture posted soon.
[* red] Insert 4x M3 nuts on one of the three sides of the end effector. Two will go in the diffuser, and two into the black 3D printed housing.
[* orange] Use 4x M3 x 8mm pan-head machine screws to attach the camera module to the side of the end effector.
[* icon_reminder] Note that the camera will be oriented to the FRONT of the machine.

Image 1

No previous image

Added