Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #8

Edit by Neil Jansen

Edit approved by Neil Jansen

Before
After
Unchanged

Step Lines

[title] Install Ring Light Diffuser
[* black] Install the 3DAT0011a ATC hub diffuser, over the LED ring light. Use three M3 x 20mm pan-head screws, and three M3 nuts to hold the diffuser to the assembly.
+[* icon_reminder] Note that it's not 100% necessary at this point to have the ring light board built and installed. ***The down-looking LED ring light board was provided in kit form to be used as a PnP SMT practice kit.*** Therefore, it's OK if you don't have it installed at this point,

Image 1

Old Version

New Version

Image 2

Old Version

New Version