-
-
30mm fan
-
2-pin cable, 1M long (red / black wires w/0.1" connector)
-
-
-
Cut the little connector off the end of the 30mm fan.
-
-
-
Add a ~20mm long piece of heat shrink tubing to each piece of wire.
-
-
-
Strip the wires on the ends of both the fan and the cable.
-
-
-
Solder the connections as follows:
-
Red fan wire to red cable wire
-
Black fan wire to black cable wire
-
-
-
Shrink the heat shrink tubing with a heat gun.
-
-
-
The end effector assembly guide will call out this fan assembly.
-